Version 4.33 (December 1, 2017) Fixed: Disabled sorting while processing (it would make a mess). Version 4.32 (November 30, 2017) Changed: Made it possible to sort by the processing time of files. Changed: Increased the maximum number of simultaneous processes. Version 4.31 (November 29, 2017) Fixed: Adding more than five folders would make it stop working. Changed: Adding a folder no longer removes the existing files. Version 4.30 (November 20, 2017) NEW: Added Ctrl+A to the program to select all the entries. Fixed: The x64 compile wasn't decoding old APE files properly. Version 4.29 (November 18, 2017) Changed: Lots of improvements to the SDK for Linux and Mac (big thanks to Robert Kausch). Changed: Made the detection for URLs in the APE tag code check for https:// and m0ps://. Version 4.28 (November 10, 2017) Fixed: Fixed compilation on Linux and Mac and also added a few SDK code changes recommended by a nice user. Version 4.27 (November 8, 2017) NEW: Added sorting the list of the main program. Version 4.26 (September 19, 2017) NEW: Added a 64-bit version. Fixed: Corrupt APE files could stall instead of bail out. Fixed: Corrected the slash direction in filenames on platforms other than Windows. Version 4.25 (March 12, 2017) Changed: Corrected the spelling of 'Psychedelic' in the ID3v1 code. Version 4.24 (March 9, 2017) Fixed: The top text on the options dialog would get cut off on high DPI. Fixed: Improved the toolbar height on high DPI monitors. Version 4.23 (March 8, 2017) Changed: Switched to VS 2017 for hopefully faster builds. Version 4.22 (February 3, 2017) Fixed: A Winamp plugin issue. Version 4.21 (February 2, 2017) Changed: Switches to the latest Visual Studio for hopefully faster builds. Version 4.20 (February 1, 2017) Changed: Switched to compiling on my laptop because it's lots smaller. Not sure why! Version 4.19 (January 27, 2017) Changed: Switched to Visual Studio 2015 -- hopefully faster builds. Fixed: Columns could get saved with no width and then they'd load with no width which was confusing. Changed: Changed a silly type used to uint32 from unsigned int because I guess it wasn't building on Linux and Mac. Changed: Made the copyrights say 2017. Version 4.18 (August 6, 2016) Fixed: WAV files that reported a longer length in the header than they actually were would fail with an I/O error (now they encode). Version 4.17 (June 8, 2016) Fixed: Much better high DPI support. Fixed: Some rare WAV files would fail to finish. Version 4.16 (March 24, 2015) Fixed: A file progress issue in build 4.15. Version 4.15 (March 23, 2015) Fixed: Build issues on Linux and Mac. Version 4.14 (February 18, 2015) Fixed: File progress wasn't working in 4.13. Version 4.13 (February 3, 2015) Fixed: Improved support for files greater than 2GB. Version 4.12 (June 26, 2013) Changed: Numerous fixes for OSX and 64-bit compatibility. Version 4.11 (January 20, 2013) NEW: Switched from MMX to SSE assembly, making compression and decompression faster. NEW: Switched to latest Microsoft compiler, making everything around 5% faster. Changed: Removed support for old Monkey's Audio 3.92 and earlier files (it hasn't been possible to make these files for over ten years -- use an old copy of Monkey's Audio to convert these files to the latest format if you have any). Changed: Fixed a few compiler warnings. Changed: Removed dependence on third-party NASM assembly compiler in favor of intrinsics (which compile nicely with all major compilers). Changed: Put all Monkey's Audio source code into a namespace APE so that linking into third-party projects should never have name collisions.v Changed: Switched from #ifndef/endif to #pragma once (now supported by any reasonable compiler). Version 4.10 (April 16, 2011) Changed: When compressing a file, the input WAV file is always opened in read-only mode (writes were never done, but previously the input WAV would only be opened in read-only mode if write permissions were not available). Changed: Updated to newer nasm compiler for MMX assembly. Changed: Updated the console application (MAC.exe) to support Unicode filenames (GUI has always had Unicode support). Changed: Removed obsolete Unicode compatibility DLL (unicows.dll) from the installer (only used by Win 9x). Version 4.09 (March 28, 2011) Changed: Updated to an icon that looks nicer on Windows 7 (sorry, still a monkey). Changed: Updated copyright dates. Version 4.07 / 4.08 Internal testing builds not released to the public. Version 4.06 (March 17, 2009) 1. Fixed: In rare cases, a corrupt frame could output as noise instead of silence when the decoder was ignoring errors. Version 4.05 (February 3, 2009) 1. Fixed: Directshow filter would fail to register on some systems. 2. Changed: Added CompressFileW2, DecompressFileW2, etc. functions that take a C++ interface as a callback for easier usage in multi-threaded environments. (as opposed to the old static function callback) Version 4.04 (February 2, 2009) 1. Fixed: Directshow filter had an unnecessary dependence on a MSVC system dll. Version 4.03 (January 21, 2009) 1. Changed: Added a help link to the help menu to show the included help file. Version 4.02 (January 19, 2009) 1. NEW: Includes Directshow filter for decoding APE files in any DirectShow compatible player like Windows Media Player, Zoom, etc. 2. Fixed: Corrupt APE files could cause decoder crashes in rare cases. 3. Changed: Updated builder that gets better compression, making for a smaller download. Version 4.01b2 (February 17, 2006) 1. Fixed: File > Exit would not close the program. 2. Fixed: Typo on the options dialog "Leave source file intact" option. 3. Fixed: APX files that weren't NULL terminated could cause a crash. 4. Fixed: Files that were skipped would show "Error" instead of "Skipped" in the status column. 5. Changed: Improved the error reporting in the status column after a failure. 6. Fixed: Possible small memory leak (100 bytes) on missing file decompression / conversion errors. 7. Changed: Increased the statusbar size to better hold batches of 100+ GBs of files. 8. Changed: The file list will scroll to show newly started files during processing. 9. Fixed: Adding or removing files from the file list is no longer allowed during processing. 10. Changed: Pausing processing no longer distorts the time estimation. 11. Fixed: Some operations would not pause properly. (external encoders, etc.) 12. Fixed: The list control would flicker more than necessary when working with long lists of files. Version 4.01b1 (January 8, 2006) 1. NEW: Features new user interface. (written in C++ and threaded for dual-core computers -- making it nearly twice as fast to compress, decompress, and convert with a dual-core setup) 2. NEW: New interface supports external codecs using simple XML configuration scripts. 3. Changed: MACDll.dll is unified to include SDK, Winamp, and CoolEdit support in one component. 4. Fixed: Corrupt / invalid APEv2 tags could cause problems in some cases. 5. Fixed: APL creation could use track boundaries that were off by 1/44100th of a second in some cases. 6. Fixed: APL creation would not properly report errors when the CUE file didn't point to an existing APE file. 7. Fixed: In very rare cases, decoding an old APE file could cause an invalid decompression error. 8. Fixed: When converting from APE -> APE, the APEv2 tag could get appended as WAV data to the new file. (instead of as a file tag) Version 3.99 (April 29, 2004) 1. Changed: Decoding engine better at handling corrupt streams / loss of internet connection while playing. 2. Changed: Simplified assembly code building for 3rd party developers. 3. NEW: Improved entropy coder for increased compression. 4. Changed: Removed RKAU support. (since it is no longer commonly used) Version 3.97 (August 2, 2002) 1. Changed: "Save File List Between Sessions" now on by default in front end. 2. Changed: Replaced usage of "#pragma once" with more non-MS compiler friendly alterternative. 3. NEW: MakeAPL now supports command line APL generation. (pass a .CUE file (no wildcards yet) -- operates in silent mode using existing settings) 4. Changed: Assembly support no longer required for backwards compatibility. (thanks Torgeir Strand Henriksen) 5. Changed: Several non-Windows buildability issues. 6. Changed: Using NASM to compile all assembly code. (aids cross-platform buildability) 7. Changed: Encapsulated the APELink code. 8. Changed: Tags aren't analyzed immediately when opening an http:// or m01p:// stream. 9. Changed: Added more functionality to the APL parser. 10. Changed: Added CreateIAPEDecompressEx2(...) to allow the creation of a ranged decoder. Version 3.96 (April 7, 2002) 1. Fixed: WAV analysis could hang on invalid wav files. 2. Changed: Monkey's Audio would try to analyze files with file extensions not related to Monkey's Audio. 3. NEW: Added APE_DECOMPRESS_AVERAGE_BITRATE field so APL's can report the bitrate for the region they represent. 4. Changed: Improved overall non-Windows build-ability. (MACLib.lib doesn't require to build) 5. Changed: APL parser no longer requires Windows. 6. Fixed: APE tagging code would fail to save tags for files with existing ID3v1 tags. 7. Fixed: MakeAPL would not run on Win95 / 98. 8. Changed: More non-Windows build-ability issues. 9. Changed: Minor assembly optimizations. (like a 2% performance improvement) 10. Changed: MACLib now builds with gcc under Linux. (no backwards compatibility or assembly support yet) 11. Fixed: Bitstream fix / change that may have accounted for decompression failures in extremely rare cases. 12. Changed: Slight NNFilter optimization. (thanks to Chun-Yu Shei) 13. Changed: Turned off "Explorer" by default for the Monkey's Audio GUI. (doesn't work well under XP... will still leave it in for a while) 14. Changed: Included the WavPack 3.93. 15. Changed: Changed the history reporting method. Version 3.95 beta + Improved compression engine for better overall compression * Modularized compression input logic, so MAC could easily support formats other than WAV * Some SDK tweaks and optimizations - Fixed a crashy bug introduced in 3.94 (caused when using MACDll.dll from VB) Version 3.94 beta + Rewritten compression engine for increased efficiencies and cleaner, more consistent code base + Decompression (of new files) is done natively block-by-block so there won't be uneven CPU usage anymore during playback + Significantly improved SDK * Bit stream optimizations that help compression speed (at least on Win2K and WinXP) * APL system now natively supported by MAC (GUI and everywhere else)... no longer a hack - Fixed an auto-renaming bug where ape files got the .wav extension - Several other little things Version 3.92 beta + Monkey's Audio now comes with the latest APE Cool Edit filter (in the tools directory) * Added .mpc support to the Monkey's Audio front-end and changed the default mp+ extension to mpc * Made a bunch of fixes and improvements to the APL creation tool included with MAC - Playback plugin now version checks the file format against the plugin format for Media Jukebox playback - Fast forwarding "past" the end of songs could crash Winamp - Removing / saving a tag of a read-only file could hang the APE file info dialog. - Tag + Rename in Monkey's Audio always renamed files to .ape regardless of their type. Version 3.91 beta - Fixed a bug where the file properties couldn't be viewed when a file was playing - Fixed a bitstream bug (from the new 3.90 bitstream) where 24-bit files could fail to compress Version 3.90 beta + New advanced bitstream format that gets better compression with very little speed difference + New compression interface available via the SDK that's nice, clean, and fully supports on-the-fly encoding * Other compression improvements to fast, normal, and high modes + The overall progress now displays in the window caption and task-bar during processing. * Improved progress updating for external encoders. - Peak level analysis works again... may need to convert files to the new version to fix them. (only affects 3.89 and 3.90 files) - Other speed and stability fixes. - Fixed a bug causing compression to fail if the WAV file had certain format fields wrong in its header (block align, bytes/sec) Version 3.89 beta + Added preliminary playback support for APL files (APE link files, for playback from Image & CUE Sheet combos) + Added 24-bit playback support for Media Jukebox and Winamp * Bitstream is now a lot more robust and unbreakable (and faster :) + Added sample-perfect seeking (can seek precisely to any sample) + Created a buffering system for both playback and encoding, which should be super handy for anyone using the SDK (to be documented later) - Fixed a problem where tracks with tons of pure silence or with a frame that took an amazing number of bits could fail to be decoded (or possibly encoded) - Fixed a tagging bug related to the new tagging system where the genre could show up as a number * Made the output location selection in Monkey's Audio a little clearer - Changed what dll's get installed for VB/NT compatibility... hopefully everything keeps working for everyone Version 3.88 beta + New tagging format... flexible and unlimited... all saving of new tags is done in this format + MAC will now create the output directory if you specify a directory that doesn't exist (supports multiple levels) + APE Info dialog now displays compressed and uncompressed file sizes + Added an option to automatically verify the creation of all APE files to Monkey's Audio + Added the option to stop processing after an error was encountered in Monkey's Audio * All I/O is now encapsulated, which should make porting much easier * Removed native http:// support from the MAC library. Now supported only through Media Jukebox or Winamp 3 readers. (sorry, may break Media Jukebox 6 Server streaming, but it will work with Media Jukebox 7) * Optimized the bit stream decoder - Monkey's Audio would crash if you named a crazy file .ape and tried to use it. * The decoder now reads data in much smaller blocks... will hopefully help people with slow hard drives - Fixed several internal library bugs... too lazy to explain them all. Version 3.87 beta 2 - Fixed the erroneous warning message about MACDll.dll not being found when starting MAC - Fixed a possible version conflict with "Explorer Control.ocx" Version 3.87 beta + Great new help file. (thanks a million Anthony Oetzmann) * The Winamp plugin and console front-end (MAC.exe) now have no external dependencies. * Monkey's Audio now only uses one non-system dll: MACDll.dll. * Changed to the 'standard' genre list of 148 genres everywhere. * MAC will now ask you if you're sure when you attempt to erase the tag from an APE file. * MAC.exe now displays what compression mode it is compressing with * Updates the Media Jukebox 7 / Monkey's Audio integration functions. - Fixed the tab order in the options dialog * The 'Remove Tag' button in the file info dialog is disabled for untagged files. - Fixed a few possible file locking and/or memory leaking bugs * Monkey's Audio will now be much more "low resolution" friendly by default Version 3.86 beta 2 + Added a handy MRU list to the "Add File" button. + MAC now dynamically loads the built-in explorer, and automatically steps in and disables it if it causes any problems. + Added .mp2 support. * MAC now remembers its last window position instead of just starting in the middle of the screen. - Stopped the built-in explorer from grabbing the 'Enter' key and firing up your player. - Fixed the spelling of 'Bottom' in the options dialog. (doh) - Fixed a problem with adding files where the extension was in all caps. Version 3.86 beta 1 * Rewrote the bitstream functions. It's the first time the bitstream has changed formats since the 1.xx's. Bitstream encoding is now quite a bit faster, and it achieves slightly better compression. * Added file-type masking to the drag-n-drop, add files, add folder, context menus, and mode switching. Very convenient, but my head hurts. * MAC will now give an error if you attempt to do something with an external encoder that you don't have. (instead of piecing out) + Added a tooltip to show the status of a file in the file list. Handy for errors that get truncated. - Fixed a bug where MAC.dll wouldn't always 'gracefully' deal with encoding errors. - Fixed a bug with the explorer context-menu's * Updated the compression menu LAME link to the new site Version 3.85 beta * Added double-buffering in a separate thread while playing remote files (MJ server, http:// stream, etc.) + Added an optional file explorer to the Monkey's Audio program + Created a 'lite' version of the toolbar - Improved ID3v2 tag handling - Fixed a bug that caused playback time to get off by a few seconds on super long songs + Added Media Jukebox 7 information functions to the playback plugin (seamless integration with MJ) Version 3.84 beta - Fixed a decompression bug that would cause a false "invalid checksum" if the WAV header size wasn't a multiple of 4 * 8-bit files should now compress about 1% or so better Version 3.83 beta + New 'extra high' mode... beefed up from the previous version... even better compression, but a bit slower + Added detection of 'pure' silence, so now pure silence takes basically no space. + Added fake-stereo detection (mono split to stereo) for improved compression on these tracks (common on CD's made from old mono recordings) + Added CPU load-balancing mechanism for the playback of 'extra high' files to keep CPU usage more even. * Removed "Bit Array Size" setting from the Winamp plugin... even I didn't know what changing the setting really did. * Added "CPU Load Balancing" settting to the Winamp plugin. - Fixed a bug in the non-MMX 'extra high' decoding routine. - Fixed a bug with 24-bit encoding introduced with the last beta. - Fixed the alignment of the "time" column inside of the interface. - Hopefully fixed a bug causing the MAC to crash when it was switched to "minimize to tray" Version 3.82 beta - Fixed a bug in the new assembly decoding routine that could cause a false "invalid checksum" error - Fixed a bug with the Winamp plugin installation from within Monkey's Audio... now MAC will close so the system files won't be locked * Added some version checking to the Winamp plugin Version 3.81 beta - Fixed a memory leak in MAC.dll - Fixed a bug causing temporary files to not get properly deleted after compression + Support for on-the-fly encoding... will make ripping much nicer once rippers add support for APE + On-the-fly conversion of your APE files... now it's a lot faster to upgrade your collection to the newest version + Convert now skips the file if you're going from APE->APE and the version and compression levels match (add your whole music folder, do a 'Convert', and it'll only convert the stuff it has to) + Added several keyboard shortcuts to make using Monkey's Audio a little easier + Improved error reporting (no more numbers :) + Can now order the file list by dragging items around + Can now display the free space for any drive in the status bar (click to pick which drive) + "Output to Specified Directory" now has an MRU list... * Added mp+ ID3v1.1 tag support + Can now copy the file list to the clipboard (useful for saving reports, etc.) (File menu or Ctrl+C) * Toolbar buttons with no current function are now disabled (i.e. "Clear Files" when the list is empty) * Bitstream decoder completely re-written in assembly... now quite a bit snappier :) - Fixed a bug causing the console front end to crash if you gave it bad parameters - Fixed a bug where tags were created with trailing spaces instead of trailing nulls - Tag and rename now does just that: tag, then rename (was renaming then tagging...) - Fixed a bug with the "Suppress Silence" feature causing divide by zero errors at the end of some songs * Almost a complete re-write of UnMAC.dll... it's finally class-based, thread safe, and all that good stuff... look for the new SDK to follow fairly soon + APE files now work fine when tagged with ID3v2 tags - Fixed a bug causing 24-bit files to not play properly from Winamp when "Scaling" was turned on + Added Media Jukebox information loading/saving functions to the Winamp plugin... makes Media Jukebox work with APE files quite a bit nicer * A few little speed tweaks... (it's getting harder and harder to find places that I can speed up...) * Seek information stored more efficiently now... files will be a few kb smaller, and error recovery/patching will be much easier - Learned how to spell "success" :) Version 3.80 * Complete remake of the 'extra high' mode... tons better compression and a lot of MMX assembly for speed :) * Some fairly substantial speed/compression improvements to 'normal' and 'high' as well + Winamp plugin can now optionally suppress long passages of silence - Fixed a file sharing bug that could cause sporadic "error decompressing frame" messages while playing - Reworked the compress/decompress/convert/etc... logic (and fixed the bug causing APE to mp+ conversion to fail) - Monkey's Audio now works fine with wav's that have extra chunks before the 'fmt ' chunk * A lot of internal changes that don't make that much difference on the outside, but they're good none the less... * No more local copies of documentation... now Monkey's Audio just links to this site Version 3.71 - Fixed a bug with decompressing 'extra high' files from 3.70 - Fixed a bug causing the file version to be displayed goofy in the file info dialog Version 3.70 + Can now "ignore" bitstream errors during playback... you'll just get a little silence + http:// streaming support... would be better, but it's hard to tune with a 56k modem ;) + support for Media Jukebox server format... (I would say more, but it's still top secret...just trust me, it's pretty cool) * Monkey's Audio now remains totally responsive while acting as a front-end for other coders; also, new pop-up windows will be minimized if Monkey's Audio is minimized * The beginning of some architecture changes that you'll hopefully never notice (but they make programming Monkey's Audio much nicer) * An even better 'High' mode * Shell extensions should now work with basically any program (Winamp, Media Jukebox, etc.) - No longer prompts to install Winamp plugin on first run (since setup should take care of this) - VBR display is no longer crazy for last one or two frames + Now supports Ogg Vorbis as an external coder (oggenc.exe) * No more ERROR 1002's for a lot of people....I just removed a bunch of security checking, because there are a lot of popular programs that don't make fully valid WAV files Version 3.60 * New and greatly improved "high" mode * Improved "extra high" mode * Added support for RKAU 1.05 (with multiple modes) * Added support for MP+ compression + Can now preserve the time stamp of the source file(s) on any new files created + Can now play an annoying sound when processing finishes (or you can replace the annoying sound with your own) + Updated the included VB run-times to the newest available (Visual Studio 6 - SP4) - Monkey's Audio should now fail if it runs out of disk space (instead of creating garbage files and saying that it was successful) - Should do a better job of cleaning up after errors (freeing memory, removing files, etc...) - A few other little fixes that I can't remember now... Version 3.51 * Loading file lists on startup and adding folders is now around 20x faster - Fixed a bug where external coder's configurations were being cleared when "Cancel" was pressed when configuring * Fixed a bug that caused problems when Monkey's Audio was minimized during closing + Fixed a bug causing files to be added more than once when adding a folder with "Add All Supported Types" selected Version 3.50 beta + Full support for external coders (LAME, MP3Enc, WavPack, RKAU, and Shorten) * Completely new install / uninstall method (tons better) * "Anti-prediction" code for 'Fast' mode is around 35% faster + Can now optionally "scale" all output to 16-bit in Winamp....allows 24-bit playback and equalization and dsp for 8-bit and 24-bit files. * "Recompress" has been changed to "Convert", and the output logic is now more consistent with all of the other modes * Can now set the peak level at which to begin using on-the-fly normalization. (no point in normalizing a file that's already at 96%) + Added an MRU list to the "Add Folder" menu + Can now display an "expanded" toolbar with a button for each page of the options...nice if you run 1024x768 or above * Clicking anywhere on the "Process" button when the file list is empty will show the mode selection menu * Removed the separate tagging button and menu item Version 3.41 * Some pretty big speed-ups of decompress and verify resulting in performance that's up to 20% better overall + Added the ability to pause during processing * Added an "Apply" button to the options window - Fixed a bug that caused the "Output to Specified Directory" not to work - Fixed a bug that could cause part of the toolbar to disappear when changing modes Version 3.40 beta * Some pretty substantial improvements to the core compression algorithms...quite a bit more bang per CPU dollar (or cycle if you prefer) in every mode * Reworked the front-end a bit...hopefully it's better looking now + Added a common options / settings dialog for the main program + Made more options for customizing how Monkey's Audio looks (can choose your own watermarks, etc.) + Added a "View Mode Comparison" feature to the mode selection area + Now displays "Total Time" for the last process (instead of just "Progress: 00.00%") + Added a (hopefully) nice instruction screen for the tagging setup + Can now optionally save the list of files between sessions + Added a progress bar to the status bar for a convenient graphical display of the overall progress * Made the Winamp plugin also support the old .MAC extension * Changed the layout of the APE File Info dialog...tighter and hopefully better * Changed the layout of the WAV File Info dialog * Changed the nasty "mb" to "MB"...crazy millibytes... they'll get 'ya every time * Changed "Done" to "OK" for the message after successful completion of a file * Added a "Ctrl+A" shortcut to select all the files - Fixed a bug causing the length of large WAV files to not display properly in the file info dialog Version 3.31 - Fixed a bug with MAC 3.30's 'extra high' mode (sorry about that) * Some decompression speedups * Changed it so the temp files are created in the same directory as the output file instead of the input file (makes way more sense) Version 3.30 + Monkey's Audio now supports 24-bit WAV files (still in beta, so possibly a little buggy) * Main listview in Monkey's Audio is now multiselect...handy for removing files or playing a whole album or whatever * Expanded right-click menu inside of Monkey's Audio (in the main listview dealie) * Added "File Info" to the explorer shell extensions...can now right click on .ape or .wav files in explorer to quickly view file info and edit tags * Changed the layout of the Winamp settings dialog....much tighter and better looking now (me thinks) * Added escape key shortcuts to the Winamp and File Info dialogs to allow for quick exits + File info dialog expanded to support .wav files + New option to "leave existing tag fields alone" when tagging... makes it easy to just change certain parts of a tag, or add the track after EAC rips (since EAC isn't ID3 v1.1) - Fixed a minor bug in the output location setting inside of MAC Version 3.20 + Monkey's Audio now checks the MAC dll versions when loading (should help prevent a lot of problems) + added this document (thanks a bunch Kim Erik Hang for typing up all of the old info) + Attempting to run a second instance of Monkey's Audio now activates and displays the currently running version (can use the shortcut to restore the window) + Can view dll versions from the about box + Monkey's Audio now saves the load/save file dialog path between sessions + APE Player can now load and save .m3u playlists * Some algorithm optimization....saves around 15 seconds an album when compressing * expanded file info dialog * can now fill genre tag field from file and directory info when tagging * the documentation for Monkey's Audio was put in sub-directory below the main directory - fixed a bug that caused the peak level not to be reset between encoding songs - fixed a bug that caused problems with read-only APE files Version 3.12 - fixed a bug that caused UnMAC.dll to crash - fixed a volume setting bug in the APE Player + added version tables to everything Version 3.11 * much less embarrassing APE Player (with better source code too) - several bug fixes to the front-end and Winamp plugin (auto-renaming bugs, errors when files are missing from playlists, etc...) Version 3.10 + fancy (actually crappy) dedicated and open-source APE player + cool EAC patch to make it output the new .ape extension * couple of other random tweaks and bug fixes Version 3.02 - several bug fixes + selectable thread priority + minimizable to the system tray - fixed auto-tagging / auto-renaming bug(s) + added "Verify" mode to the console front-end * some install tweaks Version 3.01 - bunch of bug fixes + now uses intermediate temporary files during all processing options * some front-end tweaks and improvements (right click menu) Version 3.00 ! now uses the extension .APE instead of .MAC + includes a handy file extension renamer to ease the pain of renaming to APE, also handy if rippers wont output the .ape extension + can now optionally normalize during playback * greatly expanded and improved help file + make MAC rename files as it tags 'em * new and improved about box + it can now "Stop immediately" during processing * some other stuff that I cant remember Version 2.90 * now has finalized "Extra High" mode, about twice as fast as the beta, but with a slight compression degradation + release of the Winamp plugin source code * improved & fixed auto-tagging system (now can generate tags based on directory info) * improved install routine, quite a few other little tweaks - bug fixes Version 2.80 + new "Recompress" mode to easily convert files to different compression levels (and maintain tags) * tagging converted from ID3 to ID3 v1.1 (now has track field) + a completely new install method that should be smaller and more convenient - some bug fixes (including 8-bit Winamp problems) Version 2.70 * greatly improved error detection (now uses CRC32s) + new "extra high" mode for when compression is crucial * customizable Winamp file display mode - several bug fixes Version 2.60 + 8-bit support + optional auto-tagging + some theory documentation - quite a few bug fixes Version 2.50 + a convenient installer - a few tagging support bug-fixes, * some back-end code restructuring Version 2.41 - fixed possible divide by zero error in Winamp plugin Version 2.40 beta + tag info is now editable from Winamp and MAC + added a verify mode to verify .mac files * several front-end tweaks and improvements * a great deal of back-end code was rewritten Version 2.31 - fixed a minor bug in the 'bit array size' setting in Winamp Version 2.30 + settings dialog added to the Winamp plugin - a few minor bugs fixed * several 'back-end' improvements Version 2.22 - several bug fixes * improved console front end (unified regular and EAC front ends) Version 2.21 + now Monkeys Audio can interface directly with EAC so that you can pop in a CD, click a button, and end up with compressed and tagged MAC files Version 2.20 + now features a console front-end Version 2.10 * dramatic decompression speedups (25% - 35%) - several bug fixes Version 2.00 + now has installable explorer shell extensions * greatly improved Winamp tagging support - several bug fixes Version 1.91 * now fully supports ID3 tags Version 1.90 + redesigned interface (much sweeter) - several bug fixes Version 1.83 * improved the SDK and changed function calling conventions Version 1.82 - fixed a few front-end bugs, NT compatibility problems gone + added a cool icon Version 1.81 + now includes an SDK for developers that want to add Monkeys technology to their own programs Version 1.80 * greatly increased the compression of "fast" mode ! sorry, broke backwards compatibility for fast mode files + added some documentation Version 1.72 - fixed a bug in the add folder option + added an about dialog and a few other things to the front end Version 1.71 * front-end now fully supports drag-and-drop + added the ability to add folders (with recursion) * settings inside of MAC are now saved Version 1.70 + added ability to select compression level * a few speed increases and front-end tweaks * compression with new "maximum" mode is close to the best available ! backwards compatibility broken (sorry) Version 1.63 - fixed Winamp plugin bug that caused a pause when starting a song + included a special Pentium build of the Winamp plugin Version 1.62 - minor bug fix in handling of WAV headers Version 1.61 * improved file format, slightly better compression and more error resistant ! sorry, backwards compatibility broken Version 1.60 - fixes several bugs Version 1.53 - hopefully fixed skipping problems during playback Version 1.52 - added a couple more fixes to the Winamp plugin Version 1.51 + released MAC to the public for the first time - minor fix to Winamp playlist functioning Version 1.5 * significant speed increases * less memory usage * more powerful front-end Version 1.4 * compression and performance increases * improved error checking and bitstream management Version 1.3 * everything is about 15% faster + added several front-end features Version 1.2 * better front-end * improved memory models - several bugfixes Version 1.1 + it now supports almost all WAV files (mono, low sample rates, etc.) + also added support for "advanced" WAV files with regions, markers, playlists, etc. embedded in them. Version 1.0 + first public release version

Смотреть русское с разговорами видео

Online video HD

Видео скачать на телефон

Русские фильмы бесплатно

Full HD video online

Смотреть видео онлайн

Смотреть HD видео бесплатно

School смотреть онлайн